sP20-in | The fireplace EDITION 07 / 2026 GENERAL TYPE OF FIREPLACE Insert (built-in) FUEL Wood pellets DIN plus, EN plus A1 HEATING BODY MATERIALS Steel + vermiculite FINISH StûvBlack LOADING Manual CONTROL APP Stûv Pellets (iOS / Android) FLUE CONNECTION STANDARD OUTLET DIAMETER 80 mm APPLICABLE STANDARDS EN15287-1/-2; EN13384-1 (calculation note mandatory); EN1856-1; EN14989-2 WEIGHT / DIMENSIONS MASS 160 kg STANDARD NICHE HEIGHT 1900 mm RAISED NICHE HEIGHT up to 2800 mm max. FIREPLACE DEPTH 470 mm GLASS DIMENSIONS 375 x 405 mm Ø FLUE 80 mm Ø EXTERNAL AIR INLET 60 mm PELLET HOPPER CAPACITY 18 kg ELECTRICAL SUPPLY AND NETWORK VOLTAGE / FREQUENCY 230 V – 50 Hz ELECTRICAL POWER AT IGNITION 1,097.6 W (≈ 1.1 kW) ELECTRICAL POWER IN NORMAL OPERATION / STANDBY see “performance” table below REQUIRED ELECTRICAL PROTECTION earthed socket + 300 mA residual current device (RCD) NETWORK CONNECTION Ethernet (recommended) or 2.4 GHz Wi-Fi (WPA2-PSK, 802.11b/g/n standards) ADDITIONAL PROVISION RJ45 socket at the back of the niche if using a wired connection COMBUSTION AIR MAX. LENGTH OF THE AIR INLET DUCT 5 m MAX. NUMBER OF 90° BENDS 4 MIN. AIR SUPPLY CROSS-SECTION (IF NO DIRECT EXTERNAL AIR CONNECTION) 30 cm² POSSIBLE CONFIGURATIONS rear / bottom / direct external connection (ducted) / concentric through the roof TECHNICAL OVERVIEW Conforms with : ECODESIGN 2022 / BE Phase 3 / DEFRA + A++ G A
RkJQdWJsaXNoZXIy OTcxMTM1